Factory wiring sends low voltage to your passenger window motor, especially when both windows are operated simultaneously.
The low voltage causes your motor brushes to wear prematurely which creates more resistance. This causes the motors internal breaker to trip before it gets the window rolled up.
The AutoTrix Passenger Side Window Express Down Kit gives you everything you need to route power directly from the battery to the window motor while also adding one-touch express down. The kit also comes with easy to read instructions which include before and after pictures of every step in the install process.
One Touch Auto Down like the Driver Side Window
Preventive Maintenance
Fix slow rolling motors
Prolong window motor life
Easy 1 hour or less install time
No need to replace your window motor
50% less cost then new window motor
Detailed graphical instructions
Web based detailed graphical instructions
AutoTrix Express Down Module
2 relays with connectors
28ft D.O.T. Approved GXL Automotive Wire
(Red for power, Black for Ground.)
2 fuses
(In case you blow one)
8 buttconnectors
(2 more than you need, you might drop one.)
Inline fuse holder
(First fuse already in the holder for you.)
2 ring connectors
(For proper connection to Positive and Negative studs.)
Basic Electrical Wiring
AutoTrix recommends basic electrical wiring knowledge to install this kit. If you are unsure how to strip wires and crimp connections, you may not be able to install this kit.
Wire Strippers
Wire Crimpers
10mm Wrench or Socket with Ratchet
15mm Wrench or Deep well Socket with Ratchet
Flat Head Screwdriver
Phillips Head Screwdriver
Electrical Tape