The AutoTrix 3rd brake light flasher installs in minutes and can help to protect you from rear-end collisions caused by distracted drivers. When stepping on the car’s brake pedal, our brake light flasher will flash the vehicle’s third brake (also known as the high level stop lamp) light bulb or LED twice before holding solid in order to grab the attention of drivers following behind with a visual braking alert. This easy to install module can add precious seconds to the reaction time of the person behind you and can make the difference between being rear-ended or not. A lot rides on the products you use in your car. Each and every time you leave in your car there are numerous preoccupied people on the roads that could potentially put you and your family in danger. The AutoTrix third brake light flasher will immediately grab the attention of those distracted drivers and get them focused back to the task on hand – Driving!
We Design and manufacture our products here in the USA. With years of engineering going into the development of our high level third brake light flasher we are proud to call it our own. Our Simple and reliable circuitry delivers a sudden and subtle brake flashing or pulsing alert to the 3rd brake light – nothing too fast, rapid or annoying. The AutoTrix 3rd Brake light flasher installs in minutes and will last longer than the life of your car. Our hi-level third brake light flashers are sealed so that they are water resistant and vibration proof. Have peace of mind knowing this American made product will with stand the elements and be your solution for stoping potential wreaks. View a demonstration of how this technology works. Our Brake flasher will install on any brand or model car, truck, SUV, ATV or motorcycle that has a high level / 3rd brake light.
Our Brake Light Flasher will work on incandescent and LED lights and the module is water and shock resistant. Temperature, moisture and vibration will never effect the circuitry of our brake light module. This kit comes with everything needed to install on most cars, vans, trucks, motorcycles, ATV’s, or anything with a two wire 12 volt 3rd brake light fixture in under 30 minutes.
Autotrix designs and manufactures all of our 3rd Brake Light Flashers here in the United States of America. We also test each of these modules before final packaging to ensure a quality product upon arrival. This module will not work on applications where the light it is installed with has a running light feature or is a duel element bulb.
- Added safety and visibility while braking
- Easy 30 minute or less install time
- Works with LED or Incandescent 3rd brake lights
- Designed & Manufactured in the USA
- Water and Shock Resistant Electronics
- Web based Install Instructions
- (1) Brake Light Flasher Module
- (4) Butt Connectors
Plug and Play Option
We also offer the 3rd brake light flasher in an easy to install plug and play version. The plug and play version does not require any electrical splicing or cutting; simply un-plug your 3rd brake light connector and plug the AutoTrix 3rd brake light module into your factory wiring harness. We currently only offer the plug and play option for these models:
How it works
When stepping on the car’s brake pedal, this simple setup will flash the vehicle’s third brake light bulb twice before holding solid in order to grab the attention of drivers following behind with a visual braking alert. Our third brake light flasher will not excessively flash multiple times or flash super fast like some that you might have seen on the road already. The Autotrix 3rd brake light flasher has the optimum amount of flashing needed to alert yet not annoy drivers behind you. This easy to install module can add precious seconds to the reaction time of the person behind you and can make the difference between being rear-ended or not. The 3rd brake light flasher is a simple two wire 5 minute install that could protect your car from a rear collision caused by distracted and careless drivers.
Years of American engineering and design has gone into the development of this high level brake light flasher. Simple and reliable with a “no fuss” design, our hi-level brake light flasher is water resistant and vibration proof. View a demonstration of how this technology works.
What will the Autotrix 3rd Brake Light Flasher work on?
Our Brake Light Flasher is designed to work on any 12 volt Incandescent or LED bulb. Cars, Trucks, Vans, Motorcycles, ATV’s, can benefit from installing an Autotrix 3rd Brake Light Flasher. Check out the instructions to view pictures, diagrams and example installations.
What happens to my brake light if your module ever fails
Once are products are sealed and tested to be functional before shipping there is very little chance of a failure. However, everything in this world can and will break and in the event that your module fails it will automatically by-pass and allow normal functioning of your brake bulb.
- Phillips or Flat Head Screwdriver
- Digital Volt Meter or Test Light
- Wire Strippers
- Wire Crimpers
- Wire Cutters
- Electrical Tape
I love this thing. Works reliably.
i bought this to replace those cheap chinese junk ones that fail. Seems well made
Easy for husband to install and works great!