From: $74.99
Add retro style to your two or three tail light setup on your car or truck with our universal Sequential Tail Light Kit. Sequential tail lights were originally seen on older Cougars and Mustangs from the 60’s and is now a common feature on newer model mustangs. Bring this unique functionality to your tail lights and add that killer sequential look today at an unbeatable price.
Our universal sequencer modules are sealed so that temperature, moisture and vibration will never effect the circuitry or cause any problems in the future. Our sequential tail light module kit will work with LED or Incandescent bulbs. This splice in Sequential Tail Light Kit comes with everything you will need to completely install onto any car or truck.
The Autotrix Universal Sequential Tail Light Kit will only take around a total of 30 minutes to install. Each tail light sequencer kit comes with two modules; one kit is all that you need. Please view the installation diagram for our sequencer modules here.
AutoTrix designs and manufactures our Sequential Tail Light Kits in the United States of America. We also test each of these sequencer modules before final packaging to ensure a quality product upon arrival.
Do I need a Flasher Unit?
The Turn signal flasher unit is the “heartbeat” of the circuit when you are considering adding sequencer modules. Often times with either incandescent or LED bulbs you will experience a fast flash, hyper flash or the sequence will not finish. Which looks like the last light in the sequence does not light up. This is due to the turn signal flasher not allowing enough time in-between “beats” to allow the sequence to finish. If you are installing these on an older car, truck or motorcycle we recommend that you include one of these adjustable flashers options with your installation. We have a 2-pin adjustable flasher, 3-pin adjustable flasher and a 5-pin flasher available.
Installing LED bulbs with your universal sequencer modules? LEDs draw less power than incandescent bulbs, which can cause some vehicle flashers to cycle too quickly—a condition known as hyper-flash.
Optional 50W, 6Ω LED load resistors, also called load equalizers, add electrical load to compatible 12V brake/turn circuits and may help correct this load-related fast flashing.
Available as a pair at the add-on price shown above. Each pair includes two resistors. Mounting screws are not included.
What will they change?
Load resistors address the electrical load seen by the vehicle’s lighting system. They do not directly change the delay between bulbs A, B, and C illuminating.
An appropriate adjustable flasher controls how often the sequence restarts and may be needed when the flash interval is too short for the sequence to finish. Your installation may require a compatible flasher, load resistors, or both.
Installation and mounting for Load Resistors
Load resistors connect in parallel between the affected brake/turn positive feed and ground. Follow the applicable installation diagram and identify vehicle wires by function rather than color. View Load Resistors Installation Diagram.
Caution: These resistors become extremely hot. Securely mount them to a suitable metal surface, several inches away from plastic parts and clear of wiring, loom, and other heat-sensitive materials. Never mount to plastic or leave hanging by the wires. Allow them to cool before handling.
Consider the LED load resistor add-on when your LED conversion requires additional electrical load. They are generally unnecessary solely for load correction when an incandescent installation already flashes normally.
The sequential module splices into your factory wiring harness behind your tail light housing and allows for complete brake, turn and hazard integration. The sequential kit will utilize all of your duel filament bulbs to light when braking, adding a more noticeable brake indication as well as a more pronounced turn signal effect.
When activated by the turn signal or hazards the lights will sequence from the center lights out and repeat until switched off.
When activated by the brakes the taillights will sequence once and stay lit until the brake pedal is released.
This Sequential Taillight kit is designed to work on any 12 volt duel element bulb application.
Excellent product, it was easy to install and worked perfectly on my 1970 Cougar. I installed a Painless wiring harness that was not compatible with my stock sequential controller. These modules allowed me to bypass the factory controller to operate my signals perfectly. The sequential tail lights are a distinctive feature for the Cougar which these modules allowed me to keep. Thanks
Outstanding product at a very competitive price. Highly recommended!
I bought this set of relays to replace one that failed after only one year of attending car shows and cruises. I used this on my 1964 Polara that I modified to 3 lights per side.
This device works perfectly. I used one a 77 Corvette by relocating the backup lenses and add additional red lenses to that location for sequential turn.
I purchased the sequential tail light module for my 65 Mustang. It has Thunderbird tail lights that were wired to flash as one. I hooked these up to a battery to test operation and am very happy with the results. My car is disassembled and headed to the paint shop soon. I’m anxious to start the rebuild process.